A high pressure single work station fume exhauster, available in various outputs, designed to be used with Ace 75 Series articulating and telescoping fume extraction arms.
- Standard high pressure fume exhauster for a single work station
- Cast aluminum housing and radial wheel for rugged durability
- UL/CSA Approved TEFC motor rated at 3450 RPM
- Airflow values range from 350 to 1275 CFM (rated at 4 inches static pressure)
- Motor sizes range from 1/2HP to 3HP
- Exhauster can be mounted to wall or column with supplied bracket
- Exhauster can be mounted directly to 75 series arm bracket
- Compatible with Ace 75 Series Extraction Arms
- One year limited warranty
Click To Enlarge Image
Click To Read
Frequently Asked Questions
There are currently no “blanket” regulations prohibiting the placement of used filters into standard trash receptacles. Local authorities, however, may place certain restrictions on this […]
Can I avoid using a filtration extractor and instead collect my fumes through a wall mounted arm and blower that exhausts the fumes outdoors?
Yes you can. Local authorities, however, may place certain restrictions on this practice, so we advise checking with applicable agencies to ensure conformance with the […]
Welding fume extraction hoods should be placed close enough to the welding arc to be effective, yet not so close as to distrub shielding gases […]
Used filters can be easily removed from Ace extractors. We recommend the operator wearing gloves and protective eyewear, placing the removed filters into a trashbag, […]
There are several factors that determine the best extractor to use, including location, usage, materials, and quantity of smoke/fume produced. In general, however, the rule […]
Ace makes a wide variety of filters available that work in combination to provide the best possible filtration for your work application. Generally speaking, 95% […]
There is no clear answer to this question as too many factors can influence the life of filters, including, but not limited to, welding process, […]
If I were to exhaust welding fumes outdoors through an Ace wall mounted arm and blower, can I retrofit the components to a filtration system should this method become prohibited?
Yes, the Ace stationary system is designed to accommodate such a change in regulations, so you can purchase and install Ace wall mounted arms and […]
Filters are rated on their efficiency to stop and trap particulate of a particular size. Most filters used in Ace extractors base their efficiency rating […]
Ambient air cleaners are effective supplements to fume extractors, but should be avoided as a primary tool for fume control. Because of the nature of […]
Why should I use a fume extractor instead of placing fans in my shop to blow the fumes away from my welders?
The practice of using fans and blowers in this manner is called the dilution method, and while it is commonly used, this method may not […]
The short answer is that a respirator protects the welder wearing it, but does nothing for nearby workers not wearing similar protection. The somewhat longer […]